|
Post by fredwhitworth on Jun 30, 2005 14:56:25 GMT
__. The windscreen on my Daimler Fleetline/Northern Counties body bus is held in place (not very well!) by an extruded rubber gasket. It's shaped something like an "H" shape in section with a slot down the side for a strip to be inserted into. When the strip is inserted, the main gasket is pressed against the glass and the body panel. __. I've found that C.O.H. Baines (www.coh-baines.co.uk) is one of the main producers for this kind of glazing gasket in the UK. Their illustrated catalogue is available on-line on their website. They don't have a cross-reference to the gasket needed, so I'm going to have to measure my gasket and photo it. They seem quite helpful in response to my queries. __. Anybody happen to know what the part number or other reference is for the windscreen glazing gasket for a "P-Reg" Nothern Counties body is? __. I'll also be replacing the gaskets on the destination/route windows and the side windows, too. Thanks, Bruce Henderson, NC, USA
|
|